MAX712電池充電器,max712 battery charger
MAX712電池充電器,max712 battery charger
關鍵字：MAX712電池充電器
本文源自下面的連接：http://www.rason.org/Projects/gelcell/gelcell.htm
12 VOLT GEL CELL CHARGER
BY N1HFX
Recently, a fellow amateur was looking for a gel cell charger which would first charge at a fixed rate and then later switch to a trickle charge when the cell was fully charged. After reviewing several catalogs and web sites, the MAX712 IC was discovered. This IC meets all the requirements for almost any type of battery charging system. The circuit in Figure 1 was designed specifically for 12 volt gel cells.
When a discharged gel cell is connected, the charger goes into a fast charge mode at a fixed rate of 400 ma. After the chip detects the voltage leveling off or when 4 1/2 hours has elapsed. (which ever happens first.) the fast charge will stop. After the fast charge has ended, the IC goes into a trickle charge rate of about 50 ma. This trickle charge continues until 13.8 volts is reached which will stop all charging current since the cell is now fully charged. If the cell voltage should drop for any reason, either a fast charge or trickle charge (IC will detect what is needed) will start again.
When constructing this circuit, be sure to attach a small heat sink to Q1. Apply a DC (partially filtered) voltage of at least 15.3 volts. The voltage must never go below this level even under load conditions. Many of the DC wall transformers available will work just fine as long as they meet the minimum voltage requirement. The input voltage can be as high as 24 volts. If the input voltage must be in the 30 volt range, increase R1 to about 820 ohms.
The output voltage must be aligned prior to use. Disconnect the battery from the circuit and apply power. Connect a digital volt meter or other accurate volt meter to pin 2 (positive lead) and to pin 12 (negative lead). Adjust R7 until exactly 13.8 volts is read.
Because this circuit will not overcharge a gel cell, the battery can be connected indefinitely. This circuit is designed primarily as a 12 backup system and can be connected to the load provided the device to be powered only draws current during power line interruptions. Use a diode from the battery to load if needed. This circuit makes an excellent battery backup to an amateur transceiver.
The MAX712 IC and the .62 ohm resistor are available from Digi-Key, 701 Brooks Ave, Thief River Falls, MN 56701 (1-800-344-4539). Order part numbers MAX712CPE-ND and 0.62W-1-ND respectively. All other parts are available at Radio Shack.
DE N1HFX
元件清單 PARTS LIST
| C1
聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。
舉報投訴
發布評論請先 登錄 相關推薦
熱點推薦
MAX1772：低成本多化學電池充電器的理想之選MAX1772：低成本多化學電池充電器的理想之選 在電子設備的電池充電領域，一款高效、多功能且低成本的充
探索MAX1811：USB供電的單節鋰離子電池充電器探索MAX1811：USB供電的單節鋰離子電池充電器 在電子設備的設計中，電池充電器的性能直接影響設備的使用體驗和
MAX1647/MAX1648：跨化學體系電池充電器的卓越之選MAX1647/MAX1648：跨化學體系電池充電器的卓越之選 各位電子工程師們，今天為大家詳細介紹兩款具有出色性能的跨化學體系電池
MAX712/MAX713：NiCd/NiMH電池快充控制器全方位解讀MAX712/MAX713：NiCd/NiMH電池快充控制器全方位解讀 作為電子工程師，在電池充電設計領域，找到一款合適的
MAX8808X/MAX8808Y/MAX8808Z：小巧高效的單節鋰電池充電器MAX8808X/MAX8808Y/MAX8808Z：小巧高效的單節鋰電池充電器 在電子設備飛速發展的今天，鋰
MAX8713：簡化多化學體系SMBus電池充電器的卓越之選MAX8713：簡化多化學體系SMBus電池充電器的卓越之選 各位電子工程師們，今天要和大家深入探討一款功能強大的電池充電器——
探索MAX1908/MAX8724/MAX8765/MAX8765A：低成本多化學電池充電器的奧秘探索MAX1908/MAX8724/MAX8765/MAX8765A：低成本多化學電池充電器的奧
深入解析MAX1909/MAX8725：多化學電池充電器的卓越之選深入解析MAX1909/MAX8725：多化學電池充電器的卓越之選 在電子設備日新月異的今天，電池充電器
MAX1870A：高效的升降壓鋰電池充電器MAX1870A：高效的升降壓鋰電池充電器 在當今的電子設備中，電池充電管理至關重要。MAX18
深入剖析MAX1551/MAX1555：?jiǎn)喂?jié)鋰電池充電器的卓越之選深入剖析MAX1551/MAX1555：?jiǎn)喂?jié)鋰電池充電器的卓越之選 在如今的電子設備中，單節鋰電池的應用極為廣泛，而高效、可靠的
MAX1507：小封裝大容量的單節鋰電池充電器MAX1507：小封裝大容量的單節鋰電池充電器 在電子設備的設計中，電池充電器的性能和尺寸往往是工程師關注的重點。Maxim 公司的
MAX8934A - MAX8934E：雙輸入線性充電器的技術剖析8934A - MAX8934E系列是具備智能電源選擇器的雙輸入Li+/Li - Poly線性電池充電器，能依據JEITA建議安全地為單節Li+/Li - Poly電池
MAX77975/MAX77976：高性能單節鋰電池充電器的卓越之選MAX77975/MAX77976：高性能單節鋰電池充電器的卓越之選 在電子設備日新月異的今天，電池充電
MAX77884/MAX77885：高性能單節鋰電池充電器的卓越之選MAX77884/MAX77885：高性能單節鋰電池充電器的卓越之選 在電子設備的設計中，電池充電器
MAX77757：高效USB Type - C自主充電器，助力電池充電設計MAX77757：高效USB Type - C自主充電器，助力電池充電設計 在電子設備的設計中，電池充電
|
評論